Operator Interface
5.12.7
Modes and Functions
5.12.8
Values Setting in the AutoPos and HDG Modes
Operating in the AutoPos mode the the operator can set the surge and sway values using the encoder and the arrow
push buttons.
The setting dialog (see Figure 5.59) is activated by pushing the the POS button or any arrow button. The control is
provided by arrow buttons.
To delegate control to the encoder press the encoder when the dialog is active. After control is delegated encoder
rotation is used to change the values. To select the value or to switch between the values press the encoder.
The HDG dialog is activated in similar way pushing the HDG button or a Knob Match indicator. The control is
provided by the Knob Match indicators.
As for the POS dialog the control is delegated to the encoder by pressing the encoder when the dialog is active. Rotate
the encoder to set a new HDG value and press the encoder to approve the value.
Figure 5.59: Setting with the Encoder
To set values with the arrows push buttons press any arrow button. The arrow indicators near the “Surge” and “Sway”
items switch from gray to colored (see Figure 5.60).
Figure 5.60: Setting with the Arrows Buttons
5.12.9
CP Orientation
There are four orientations allowed for CP: forward, aft, port and starboard. This is adjusted in DP System during
installation and commissioning.
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
100
Содержание NavDP 4000 Series
Страница 88: ...NAVIS NavDP 4000 Operation Manual Figure 5 35 Dark Theme 87 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 222: ...NAVIS NavDP 4000 Operation Manual Figure 10 74 Drift Plot Window 221 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 324: ...NAVIS NavDP 4000 Operation Manual Figure H 4 Remote DLS Mode 323 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
