Data Logging
H.4
Data Logger Analyzer
When you press “View” softkey on DL Console (“DP (IJ) Records” window) Data Logger Analyzer (DLA) window
will appear.
H.4.1
DLA Main Window
When DL Analyzer is run LCD displays Main Window (see figure H.15).
If you had selected particular record in the “DP (IJ) Records” window (see figure H.11), before DLA is run it will be
focused on this record:
– record duration will be displayed at the bottom side of the screen;
– the record will be selected in the Record table;
– charts will be plotted according to the record duration.
Figure H.15: DL Analyzer Main Window
The following starting tabs are available for DL Analyzer:
– Motion;
– Commands and Feedbacks;
– Power;
– Sensors;
– GPS.
Each starting tab contains a set of default charts and tables.
Set of starting tabs may vary for different vessel configurations.
Full layout list is available by pressing
softkey (see Section H.4.2).
H.4.2
Main Window Softkeys
The main window contains the following softkeys:
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
332
Содержание NavDP 4000 Series
Страница 88: ...NAVIS NavDP 4000 Operation Manual Figure 5 35 Dark Theme 87 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 222: ...NAVIS NavDP 4000 Operation Manual Figure 10 74 Drift Plot Window 221 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 324: ...NAVIS NavDP 4000 Operation Manual Figure H 4 Remote DLS Mode 323 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
