NAVIS NavDP 4000 Series, Руководство по эксплуатации

Страница: 206 / 348

NAVIS NavDP 4000. Operation Manual
Figure 10.55: AP Set Speed dialog window
NOTE! The AutoSpeed mode is optional and depends on the configuration.
10.7.4 Steering System Monitoring Area
The independent rudders in NAVIS NavDP 4000 are used to steer the vessel in Autopilot mode, the Steering System
Monitoring Area contains the following indicators for each rudder:
Rudder angle (bar-graph). Green bar shows rudder command. Yellow shows actual angle. Red triangles shows rudder
command limits.
Rudder softkeys See Section 6.2.1, page 111 for status details.
Steering System Status indicator.
Also, if propellers are used in AP, the Steering System Monitoring Area contains the following indicators for each pro-
peller:
Propeller thrust
(bar-graph). Green bar shows thrust command. Yellow bar shows actual thrust. Red triangles shows
thrust command limits.
Propeller softkeys See Section 6.2.1, page 111 for status details.
Steering System Status indicator.
Azimuth thrusters in NAVIS NavDP 4000 are used to steer the vessel in Autopilot mode, the Steering System Moni-
toring Area contains the following indicators for each thruster:
Azimuth thruster direction indicator Green triangle shows direction command. White triangle shows actual direction.
Azimuth thruster digital indicators
(actual, command)
Azimuth thruster thrust (bar-graph). Green bar shows thrust command. Yellow bar shows thrust feedback. Red trian-
gles shows thrust command limits.
Thruster softkeys See Section 6.2.1, page 111 for status details.
Steering System Status indicator.
Steering System Status indicator color:
Grey Not ready
Green
Under AP control
Red Failure
205
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”