NAVIS NavDP 4000 Series, Руководство по эксплуатации

Страница: 100 / 348

NAVIS NavDP 4000. Operation Manual
5.12.6 Configuration Menu
Configuration menu is meant for accessing additional parameters of MCP. To activate the menu press and hold DIM+
and DIM- buttons at the same time. Use the encoder rotation to switch between the menu items and press the encoder to
select the item.
There are following options in Configuration menu:
RETURN back to the previous window
Set volume sets volume of audible alarm
Set night palette switch to the night palette
Alarm test the alarm messages test
Print DP screen print the current screen
Lamp test activates the test of console lighting
System Information information about MCP version and hardware status.
Connections
- choose connection from available in a list.
Service...
switch to the Service menu
NOTE! The item list depends on the system configuration
The Service menu:
RETURN back to the previous window
Set panel role...
the panel role setting (MCP, PCP,....)
Calibrate joystick
joystick calibration function
Device test switch to the test list
Service mode activate the Service mode dialog
Restart panel activate the panel restart dialog
Reboot panel activate the panel reboot dialog
Shutdown panel activate the panel shutdown dialog
The Device test submenu:
RETURN
- back to the previous window
Keyboard&encoder test
SD card test
EL-foil test
Joystick test
Battery test
Speaker test
Beeper test
Digital inputs test
Power management test
Show report
- display the device overall report
The Service menu and its submenu are intended for engineers. The detailed information is in the Service Manual.
99
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”