System Functions
The value for wind direction set in the dialog box is displayed under the
Wind
text.
Speed var.
means that the wind speed can be read on the Capability
Plot.
Wave
In
Auto
mode the wave direction matches the wind direction and the wave height is calculated by the system as a
function of the wind speed (see Figure 10.62). In this case
Auto
softkey is highlighted by white color and
Change
softkey
is unavailable.
Press the
Auto
softkey, so the
Change
softkey becomes available. Press the
Change
softkey for manual input of the
wave parameters (direction and height).
In the opened dialog box (see Figure 10.68):
– select the wave direction value:
– enter a new value in degrees in the
DIR
field or
– press
Hold
softkey to enter present value for the wave direction;
– press
H
softkey and enter a new value for the wave height in the corresponding field;
– press
OK
softkey to apply the choice and leave the dialog box. In case incorrect values are entered for the wave
direction/height,
OK
softkey is unavailable.
Press
Cancel
softkey to leave the dialog box without any changes.
Figure 10.68: Example of the Dialog Box for Wave Direction/Height Settings
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
216
Содержание NavDP 4000 Series
Страница 88: ...NAVIS NavDP 4000 Operation Manual Figure 5 35 Dark Theme 87 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 222: ...NAVIS NavDP 4000 Operation Manual Figure 10 74 Drift Plot Window 221 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 324: ...NAVIS NavDP 4000 Operation Manual Figure H 4 Remote DLS Mode 323 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
