System Functions
Figure 10.88: The Consequence Analysis Window with Legend
The failure effect indicator (1):
red
— the failure
(8)
selected in the
System failure list
leads to failures of one or more components. These elements are
marked with red round indicators (
1
) and the dashes are displayed instead of values for power/thrust limits. The list
can contain one or more red failure indicators;
not visible
— the selected failure does not affect on the component operation.
Indicator of the component state in the system (2):
green
— the component is active. The component activity means:
– for the power component: it operates normally (powers a bus) and the corresponding tie breaker is closed;
– for the thruster: it operates normally and is included in the Auto Thruster group;
– for circuit/tie breaker: it is closed.
dark grey
— the component is inactive. It means:
– for the power component: it is disconnected from a bus or failed;
– for the thruster: it is not included in the Auto Thruster group or failed;
– for circuit/tie breaker: it is open.
The system failure list
5
— the consequence indicator showing Consequence analysis general state;
6
— indicator of the component state in the Consequence analysis;
7
— a failure name;
8
— selected failure. You can select a worst-case failure by touching the touchscreen or using arrow softkeys. As soon
as a worst-case failure has been selected, The Consequence Analysis function informs you which elements would
be inactive in case of this failure (see
(1)
indicator).
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
230
Содержание NavDP 4000 Series
Страница 88: ...NAVIS NavDP 4000 Operation Manual Figure 5 35 Dark Theme 87 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 222: ...NAVIS NavDP 4000 Operation Manual Figure 10 74 Drift Plot Window 221 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 324: ...NAVIS NavDP 4000 Operation Manual Figure H 4 Remote DLS Mode 323 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
