NAVIS NavDP 4000. Operation Manual
Figure 10.69: TAL Mode Selection Dialog Box
The value for wave direction is displayed under the
Wave
text in the
Auto
mode.
Height var.
means that the wave height is calculated automatically as a
function of the wind speed.
The values for wave direction and height set in the dialog box are dis-
played under the
Wave
text in the manual mode.
NOTE!
Both wind speed and wave height are indicated in values set by the
operator in “Units” page of “Param” window.
NOTE!
Refresh is carried out not continually in Hypothetic Mode. The operator
should change value of any parameter (wind, current direction, etc.) and
apply it, then the refresh process starts.
Selection of Hypothetic TAL Mode
To select a TAL mode:
– press
Change
softkey located under the TAL mode name;
– select a desired TAL mode in the opened dialog box (see Figure 10.69).
Capability Plot Printout (option)
To get the Capability Plot printout press the
softkey located in the lower left corner of the Plot. The actual plot
is printed on the configured in
NAVIS NavDP 4000
system for printing information (usually Screen printer).
The printout contains (see Figure 10.70):
– the plot in the selected mode (Real or Hypothetic) and view (TRUE or REL);
– the vessel heading;
– wind, current and wave directions in true and relative coordinates;
– current speed;
– wave height (in case it is manually entered in the Hypothetic mode);
217
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
Содержание NavDP 4000 Series
Страница 88: ...NAVIS NavDP 4000 Operation Manual Figure 5 35 Dark Theme 87 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 222: ...NAVIS NavDP 4000 Operation Manual Figure 10 74 Drift Plot Window 221 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 324: ...NAVIS NavDP 4000 Operation Manual Figure H 4 Remote DLS Mode 323 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
