Operator Interface
5.6.2
Offset heading input
You can also set the Offset value (
Offset
softkey is active) — see figure 5.22(b).
In this case the
NEW Set
heading changes automatically according to the
Offset
entered. Use the
DIR
softkey to
change the direction of rotation: Port of Starboard.
The turn direction depends on value of the ‘Always Use Shortest Turn’ parameter. See the 5.6.3 for details.
It is recommended to check the New Deviation Direction when entering an offset value. When operator press
Hold
button, dialog is switched to preset heading input mode (
Offset
button is off).
5.6.3
Heading new setpoint indication on Map
When
Map
window is visible, new heading setpoint and turn direction is shown on the map view.
The turn direction depends on value of the ‘Always Use Shortest Turn’ parameter. The 270
∘
turn track for the param-
eter’s different values is represented on the figures 5.23 and 5.24.
Figure 5.23: The turn track in case Always Use Shortest Turn=Yes
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
80
Содержание NavDP 4000 Series
Страница 88: ...NAVIS NavDP 4000 Operation Manual Figure 5 35 Dark Theme 87 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 222: ...NAVIS NavDP 4000 Operation Manual Figure 10 74 Drift Plot Window 221 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 324: ...NAVIS NavDP 4000 Operation Manual Figure H 4 Remote DLS Mode 323 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
