NAVIS NavDP 4000 Series, Руководство по эксплуатации

Страница: 59 / 348

System Messages and Alarms
is used for displaying a dialog window (see Figure 4.2).
The window contains the following information:
– version of the system;
– e-mail for service, support and feedback.
Figure 4.2: Service Dialog Window
Press “OK” softkey to close the window.
4.4 ACK Softkey
Use the ACK softkey in SYS Panel to acknowledge new (unacknowledged) alarms.
ACK softkey is blinking in case of one or more unacknowledged alarm in the list.
4.5 Silence Softkey
Use the Silence softkey in SYS Panel to silence all unacknowledged alarms.
The softkey has the following color code:
red — the mode is ON;
dark-red — the mode is OFF.
The mode is available to switch on in case of one or more unacknowledged alarm in the list.
4.6 Alarm Window
Alarm window is shown in Figure 4.3. Use this window to read and acknowledge messages.
Press
ACK
softkey to acknowledge a selected message.
Press
All ACK
softkey to acknowledge all the messages displayed in the window.
Use arrow softkeys to select a message. The selected message is displayed against blue background.
Press
All softkey to display all the messages.
Press Active softkey to display only active messages.
Press Static view softkey to place every incoming message at the end of the list and that will be shown on the screen
as the selected message.
Press Dynamic view softkey to place every incoming message at the end of the list without being set as the selected
message.
Press Details softkey to display the detailed information about the alarm including the following (see Figure 4.4):
– the message text;
– the alarm type;
– the alarm source (CCA and/or CCB control station);
– the time of alarm initiated (Start time) ;
– the time of alarm ended (Stop time);
– the time of acknoweledgement (Ack time);
– the control station on which the alarm have been acknowleged (CCA or CCB).
The Alarm Window messages have the following format
Message category Message status Time of message initi-
ated Message text
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
58