System Hardware Configuration
Figure 2.30: Control Panel MCP-B
2.7.1
Power
Indicates if the system is powered.
2.7.2
Communication Icon
Communication Icon indicates the state of the control panel connection with a control computer. Green indicator
means connection is OK while red one means connection fault.
2.7.3
Rotary Knob
Rotary knob contains the following control elements:
– pushbutton at the top;
– match buttons on the sides at the top, bottom, left, right;
– rotary handle;
Rotary knob is meant for:
– position and heading offset;
– menu navigation;
– set parameters in Quick settings menu;
– controls navigation.
2.7.4
In Control
The In Control button is used for transferring control between:
– DP A and DP B systems (for DP-2 systems) ;
– control panels of the control system( if two or more control panels are in use).
The active panel indicator is green highlighted.
2.7.5
DIM Mode
Pushbutton is used to control the brightness of the control panel’s backlight.
To change brightness long press the button then rotate the knob.
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
42
Содержание NavDP 4000 Series
Страница 88: ...NAVIS NavDP 4000 Operation Manual Figure 5 35 Dark Theme 87 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 222: ...NAVIS NavDP 4000 Operation Manual Figure 10 74 Drift Plot Window 221 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 324: ...NAVIS NavDP 4000 Operation Manual Figure H 4 Remote DLS Mode 323 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
