Data Logging
H.2.2.1
Current Record Information
“Name” field contains the information for the current record:
– record index, in format [x];
– starting date and time, in format dd.mm.yyyy hh.mm.ss.
NOTE!
The time stamp displayed is the current system time at the start of inter-
val. In case the system time is changed by operator the current record
data are not changed.
H.2.2.2
Record Modes
The “Duration” string contains the following information:
– current record duration. The value is changing according to the processing;
– record mode.
There are two record modes:
Continuous
— a record is not split into intervals;
Periodic
— a record is split into intervals.
To change the record mode:
– press “Change” softkey. The value of the entry field will be changed to “Continuous” (“Periodic”);
– press “Apply” softkey to approve the command.
If you do not want to change the status, press either “Change” softkey again or “Cancel” softkey to cancel the
command.
Switching to the “Continuous” mode affects all recorders (both Local recorder and DLS).
The “Continuous” mode is switching automatically to “Periodic” mode in the following cases:
– “Restart” softkey is pressed;
– local logging status is switched between “On” and “Off” (in any direction);
–
NAVIS NavDP 4000
system is restarted.
In case a local control computer is restarted, the “Continuous” mode:
– persists if other control computers have the “Continuous” mode for recording;
– does not persist if there is no computer recording in the “Continuous” mode in the system.
After the “Continuous” mode is off, the interval is labeled with the standard prefix and with the comment “Continu-
ous”. The alarm message is generated with label creation (see figure H.8).
Figure H.8: Alarm Message: “Continuous” Label
H.2.2.3
Label
“Label” field displays current record label.
To assign a label:
– press “Mark” softkey. Automatic label will be displayed in the “Label” field;
– press “Apply” softkey to approve the command.
If you do not want to mark the record, press “Cancel” softkey to cancel the command.
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
326
Содержание NavDP 4000 Series
Страница 88: ...NAVIS NavDP 4000 Operation Manual Figure 5 35 Dark Theme 87 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 222: ...NAVIS NavDP 4000 Operation Manual Figure 10 74 Drift Plot Window 221 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 324: ...NAVIS NavDP 4000 Operation Manual Figure H 4 Remote DLS Mode 323 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
