NAVIS NavDP 4000 Series, Руководство по эксплуатации

Страница: 123 / 348

Thrusters
Figure 6.41: Shaft generator on scheme
Shaft Generator
The information about a shaft generator is displayed as shown in Figure 6.41
which includes:
– round indicator with the shaft generator short name. It’s color coded. White color means that the generator is
connected to a bus, otherwise the color is grey.
– circuit breaker indicator. If the shaft generator is connected to a bus the circuit breaker is displayed closed; otherwise
it is displayed open.
– shaft generator power numeric indicator.
– shaft generator power bar indicator that shows the current produced power as a percentage of the maximum available
power.
– limit on the power demand (limit on the command signal) from the DP control system. This limit is set in Power-
Limits page of Param window and shown with pointer .
Main Engine
The information about the power consumed by the main engine is displayed as shown in Figure 6.42
Figure 6.42: Main engine on scheme
which includes:
– square indicator with the main engine short name.
– main engine power numeric indicator.
– main engine power bar indicator that shows the current produced power as a percentage of the maximum available
power.
– limit on the power demand (limit on the command signal) from the DP control system. This limit is set in Power-
Limits page of Param window and shown with pointer .
If the main engine can run a FiFi pump, it is indicated as shown in Figure 6.43
Figure 6.43: FiFi pump on scheme
– fire pump indicator is white-colored if the Fire pump is connected otherwise it is grey-colored.
– power consumed by the fire pump is indicated by white color on the power bar indicator.
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
122