System Functions
Target Plot
Target Plot at the bottom of the Target window shows transponders located relative to the vessel.
See the description of the transponder ID indicators on the Target view for transponders indicated on the Target plot.
Target Processing results are presented on the right of the Target plot.
In case the
SingleTarget mode
is activated (MultiTarget softkey is grey-colored) the following data are displayed:
Range
to target (see Figure 10.18)
Bearing
to target — is presented by:
– absolute value if the Plot is displayed in True mode.
– relative value if the Plot is displayed in Rel mode.
Target coordinates
are presented by:
– Xg, Yg if the Plot is displayed in True mode (Local N/E),
– Target X, Target Y if the Plot is monitored in Rel mode (vessel coordinate system)
Target movement
are presented by:
if the Plot is displayed in True mode
COG — Course Over Ground (direction of target movement)
SOG — Speed Over Ground (speed of target movement)
if the Plot is displayed in Rel mode
Vx — Speed on X direction
Vy — Speed on Y direction
In case the
MultiTarget mode
is activated the following data are displayed:
Range
to Tgt#1 (see Figure 10.25)
Bearing
to Tgt#1 that can be presented by:
– absolute value if the Plot is displayed in True mode.
– relative value if the Plot is displayed in Rel mode.
Target Course
is indicated with:
– absolute value (direction from Tgt#1 to Tgt#2) if the Plot is displayed in True mode,
– relative value if the Plot is monitored in Rel mode.
Vessel coordinates
in Target coordinate system
– if the Plot is displayed in Rel mode: Ship X, Y in Target Ref-System.
– if the Plot is displayed in True mode: Target Ref-System Origin Xg, Yg (Local N/E)
Target movement
are presented by:
if the Plot is displayed in True mode
COG — Course Over Ground (direction of target movement)
SOG — Speed Over Ground (speed of target movement)
if the Plot is displayed in Rel mode
Vx — Speed on X direction
Vy — Speed on Y direction
Target processing status indicator
Green-colored
if the filter status of all the targets selected is green-colored (two targets in MultiTarget mode, one target
in SingleTarget mode)
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
182
Содержание NavDP 4000 Series
Страница 88: ...NAVIS NavDP 4000 Operation Manual Figure 5 35 Dark Theme 87 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 222: ...NAVIS NavDP 4000 Operation Manual Figure 10 74 Drift Plot Window 221 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 324: ...NAVIS NavDP 4000 Operation Manual Figure H 4 Remote DLS Mode 323 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
