NAVIS NavDP 4000 Series, Руководство по эксплуатации

Страница: 106 / 348

NAVIS NavDP 4000. Operation Manual
Figure 6.3: The required speed values in Speed VECTOR mode
in
- the axis is in automatic control mode
out - the axis is in manual control mode
The arrows color code:
Green - the axis is in automatic control mode
Dark-green
- the axis is in manual control mode
Light-gray - the axis is out of control or is not synchronized (the arrow direction is opposite to syncronization)
Red - the axis is not synchronized (the arrow direction is the same as syncronization)
Figure 6.4: Thrust Ability Diagram. Red arrows: need to synchronize
The system keeps the actual value of force till the synchronization and moment and doesn’t react to any tilt of joystick
and rotation of knob unless they are synchronized.
6.1.3 Thrusters State Table (Manual Thruster Window)
The Manual Thruster Window (see figure 6.1) contains the columns:
Run — Run signal round indicator;
Sel — Select signal round indicator;
Rdy — Ready signal round indicator;
Flt
— Fault signal round indicator;
Mode — Mode text indicator;
RPM cmd — RPM command digit indicator;
105
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”