System Description
The WaterCop® SmartConnect is designed to work alongside the WaterCop® Pro Integrated System or WaterCop® Classic and
deliver real time notification of leaks in your plumbing system. The SmartConnect unit is powered by the Pro panel or low
voltage Classic actuators through a straight through CAT5 or CAT6 cable. The SmartConnect can be connected with up to 50ft
of straight through CAT5 or CAT6 cable can if needed to get stronger Wi-Fi reception. WCACT1, WPMS and WPMSH units will
need the external power supply (ACA100).
Check at the shipping package contains the following:
WaterCop SmartConnect device
Owner’s Manual
Read Instructions before any installation is attempted. All sections of this Product Manual and accompanying Installation Guide
should be read and completely understood.
How the System Works
The SmartConnect unit receives the valve status from the RJ45 outputs on both the Pro and Monitoring Station panel and
Classic actuator. The information goes to a cloud server and out to the SmartConnect App on your phone or tablet. The
SmartConnect App will notify when a valve changes state alerting you to a possible leak detection. The app can also notify on a
loss of signal from the SmartConnect to the cloud service which can indicate a loss of power or internet connection.
System Requirements
Smart Phone or tablet with the following:
Android Version 5.0 or higher/ iOS - 10.3 or higher
Sim card or WI-FI connectivity
2.4 GHz Router with Protected Wi-Fi (with a password)
Bluetooth 4.1 or above
50’ CAT5E cable max to WaterCop
WCACT1,
WPMS
and
WPMSH
require additional power supply (ACA100) sold separately
