4)
Once saved and connected, cycle the valve open and closed from the app to ensure the SmartConnect is connected,
operating and sending notifications.
5)
Delete your contact info by clicking the ‘ > ‘ icon on the Contacts line and then the ‘-‘ sign to the right. Click ‘yes’ when
asked “Are you sure?’.
6)
Now add customer contact info and repeat this until all desired contacts are saved (only applicable if a list of contacts
were provided ).
7)
Leave or email the instructions how to add contacts so they can add them at their convenience now and/or in the
future.
FCC Information
This
equipment
has
been
tested
and
found
to
comply
with
the
limits
for
a
Class
B
digital
device,
pursuant
to
part
15
of
the
FCC
Rules.
These
limits
are
designed
to
provide
reasonable
protection
against
harmful
interference
in
a
residential
installation.
This
equipment
generates,
uses,
and
can
radiate
radio
frequency
energy
and
if
not
installed
and
used
in
accordance
with
the
instructions,
may
cause
harmful
interference
to
radio
communications.
However,
there
is
no
guarantee
that
interference
will
not
occur
in
a
particular
installation.
If
this
equipment
does
cause
harmful
interference
to
radio
or
television
reception,
which
can
be
determined
by
turning
the
equipment
off
and
on,
the
user
is
encouraged
to
try
to
correct
the
interference
by
one
or
more
of
the
following
measures:
•
Reorient
or
relocate
the
receiver
•
Increase
the
separation
between
the
equipment
and
receiver
•
Connect
the
equipment
into
an
outlet
on
a
circuit
different
from
that
to
which
the
receiver
is
connected
•
Consult
the
dealer
for
help.
The
user
is
cautioned
that
changes
and
modifications
made
to
the
equipment
without
the
approval
of
manufacturer
could
void
the
user's
authority
to
operate
this
equipment.
Operation
is
subject
to
the
following
two
conditions:
1.
This
device
may
not
cause
interference
2.
This
device
must
accept
any
interference,
including
interference
that
may
cause
undesired
operation
of
the
device
To
satisfy
RF
exposure
requirements,
this
device
and
its
antennas
must
operate
with
a
separation
distance
of
at
least
20
cm
from
all
persons
Limited Warranty
DynaQuip®
Controls
Corporation
warrants
the
electrical
components
of
the
WaterCop®
SmartConnect
to
be
free
from
defects
in
material
and
workmanship
under
normal
use
and
if
properly
installed
for
a
period
of
three
years
from
the
date
of
purchase.
If
found
to
be
defective
as
mentioned
above,
it
will
be
replaced
or
repaired
if
returned
prepaid
along
with
proof
of
date
of
purchase.
This
shall
constitute
the
sole
remedy
of
the
purchaser
and
the
sole
liability
of
DynaQuip®
Controls
Corporation.
To
the
extent
permitted
by
law,
the
forgoing
is
exclusive
and
in
lieu
of
all
other
warranties
or
representations
whether
expressed
or
implied,
including
any
implied
warranty
of
merchantability
or
fitness.
In
no
event
shall
DynaQuip®
Controls
Corporation
be
liable
for
special
or
consequential
damages.
