Mitsubishi Electric MELSERVO MR-J4-03A6-RJ, Инструкция по эксплуатации

Страница: 120 / 610

3. DISPLAY AND OPERATION SECTIONS
3 - 47
(c) Parameters of 7 or more decimal digits
The following example gives the operation procedure to change the [Pr. PA06 Electronic gear
numerator (command pulse multiplication numerator)] to "12345678".
Press the "MODE" button to switch to the basic setting parameters screen.
The screen flickers.
Press the "SET" button once.
Press the "SET" button
once.
Upper 3 digits
Change the setting with
the "UP" or "DOWN"
button.
Press the "SET" button
once.
The setting is
determined.
(Note 2)
Press the "MODE" button once.
Press the "MODE"
button once.
Middle 3 digits
…… ……
……… ………
(Note 1)
The screen flickers.
Press the "SET" button
once.
Change the setting with
the "UP" or "DOWN"
button.
Press the "SET" button
once.
The setting is
determined.
(Note 2)
Press the "MODE"
button once.
Lower 3 digits
…… ……
……… ………
(Note 1)
Note 1. Pressing the "SET" button in upper, middle, or lower 3-digit display makes the display flicker.
2. Pressing the "SET" button in upper, middle, or lower 3-digit display fixes the setting.
The display can be switched among upper, middle, and lower 3-digits by pressing the "MODE"
button.
Switching the display between upper, middle, and lower 3-digit is also possible by pressing the
"MODE" button while the display is flickering.
The changed value will be canceled when the "MODE" button is pressed for 2 s or more while
flickering.
To shift to the next parameter number, press the "UP" or "DOWN" button.
To change the screen to another, press the "UP" or "DOWN" button to change the screen to another
parameter number display screen and press the "MODE" button.
www.kavrammuhendislik.com.tr