Mitsubishi Electric MELSERVO MR-J4-03A6-RJ, Инструкция по эксплуатации

Страница: 428 / 610

10. COMMUNICATION FUNCTION (MITSUBISHI GENERAL-PURPOSE AC SERVO PROTOCOL)
10 - 5
Command Data No. Description
Control
mode
Frame
length
CP/BCD
CL
PS
[1] [7] [0] [1] to [F] [F] Lower limit value of each parameter setting range
Reads the permissible lower limit values of the parameters in the parameter
group specified with the command [8] [5] + data No. [0] [0]. Before reading the
lower limit values, therefore, always specify the parameter group with the
command [8] [5] + data No. [0] [0].
The decimal equivalent of the data No. (hexadecimal) value corresponds to the
parameter No.
12
[0] [8] [0] [1] to [F] [F] Each parameter symbol
Reads the symbols of the parameters in the parameter group specified with the
command [8] [5] + data No. [0] [0]. Before reading the symbols, therefore,
always specify the parameter group with the command [8] [5] + data No. [0] [0].
The decimal equivalent of the data No. (hexadecimal) value corresponds to the
parameter No.
[0] [9] [0] [1] to [F] [F] Writing enable/disable of parameters
Reads writing enable/disable of the parameters in the parameter group
specified with the command [8] [5] + data No. [0] [0]. Before reading writing
enable/disable, therefore, always specify the parameter group with the
command [8] [5] + data No. [0] [0].
0000: Writing enabled
0001: Writing disabled
4
Note. This is not available with the MR-J4-03A6-RJ servo amplifier.
(3) External I/O signals (command [1] [2])
Command Data No. Description
Control
mode
Frame
length
CP/BCD
CL PS
[1] [2] [0] [0] to [0] [2] Input device status 8
[4] [0] External input pin status
[6] [0] to [6] [2] Status of input device turned on by communication
[8] [0] to [8] [3] Output device status
[C] [0] External output pin status
(4) Current position latch display (command [1] [A])
Command Data No. Description
Control
mode
Frame
length
CP/BCD
CL
PS
[1] [A] [0] [0] MSD (Mark detection) rising latch data (data part)
8
[0] [1] MSD (Mark detection) falling latch data (data part)
[0] [2] MSD (Mark detection) rising latch data (data part + additional information) 12 or less
[0] [3] MSD (Mark detection) falling latch data (data part + additional information)
www.kavrammuhendislik.com.tr