Mitsubishi Electric MELSERVO MR-J4-03A6-RJ, Инструкция по эксплуатации

Страница: 116 / 610

3. DISPLAY AND OPERATION SECTIONS
3 - 43
(b) Setting of 4 to 6 digits
The following example is the operation method to change the position data of the point table No. 1 to
"123456".
The screen flickers.
Press the "SET" button once.
Press the "SET" button
once.
Upper 3 digits
Change the setting with
the "UP" or "DOWN"
button.
Press the "SET" button
once.
The setting is
determined.
(Note 2)
Press the "MODE" button
once.
Press the "MODE"
button once.
Lower 3 digits
…… ……
……… ………
(Note 1)
Press the "MODE" button four times.
……A point table No. is displayed.
Press the "UP" or "DOWN" button to
select point table No. 1.
Press the "SET" button once.
Note 1. Pressing the "SET" button in either upper or lower 3-digit display makes the
display flicker.
2. Press the "SET" button to confirm on upper 3-digits or lower 3-digits screen.
The display can be switched between upper and lower 3-digit by pressing the "MODE" button.
Switching the display between upper and lower 3-digit is also possible by pressing the "MODE"
button while the display is flickering.
The changed value will be canceled when the "MODE" button is pressed for 2 s or more while
flickering.
Press the "UP" or "DOWN" button to switch to other item of the same point table No.
Press the "MODE" button to switch to the next point table No.
www.kavrammuhendislik.com.tr