Mindray Passport V Скачать руководство пользователя страница 211

Страница: 211 / 288

Print Setup Menu

Printing

16 - 2

0070- 0-0704-02

Passport V Operating Instructions

Waveforms may be printed at the time of an alarm by selecting

Active

in response to

Print

On Alarm

in the

Alarm Setup Menu

, which can be accessed by pressing the

Alarms:

Limits

key. Waveforms may also be printed at regular intervals by selecting

Print

Interval

. Available selections are

OFF, 1 min, 5 min, 10 min, 15 min, 20 min, 30

min, 1 hr,

and

2 hr

To choose which waveform will print to the local printer select

Waveform 1, 2, or 3

and

then select any of the available choices.

The following printer options may be available:

Local

Remote, and Local/Remote

. A

default printer or combination of printers can be set.

Local

printing will initiate a printout delivered via the local printer.

Remote

printing will send a printout to a remote printer (HP1505N, HP4015N) connected

to the

Passport V

During printing, if the operator changes a setting (e.g., scale, lead name), the report will
mark the change at the changed time.

16.2.1

Local Printer (Optional)

The

Passport V

local printer can provide a printed record of all patient parameters. It is a

three-trace thermal strip chart local printer with an integral paper spool. The local printer uses
plain white thermal paper, 5 cm wide.

NOTE:

All grid patterns and data are printed by the local printer.

Operation of the Local Printer

Select the waveforms to print to the local printer via the

Print Setup Menu

using the

Navigator Knob. To change the waveforms that appear, select

Waveform 1, 2, or 3

and choose from the available parameters.

To print, select a printer from

Print Setup Menu

〉

Select Printer

. The printer

selection is

Local

by default.

Press the

STRIP

key to initiate printing.

Press the

STRIP

key again to abort the printout. Select printouts will also require the use

of alternate menus or keys.

During a waveform printout, tic marks appear at one second intervals, for reference.

Printouts from the Local Printer

Strip Printing

When the

STRIP

key is pressed a 16 or 32 second strip is printed, acccording to the “Print

Length” setting. The source of the printout is indicated on the strip as

REALTIME REPORT

Continuous ECG Printing

If a real-time, continuous printing of ECG data is required, press the

Cont ECG

key. To abort

printing, press the

Cont ECG

Strip

, or

Print Trend

key.

Содержание Passport V

































































































































































































































































































Результаты поиска

Содержание Passport V

Отзывы:

Похожие инструкции для Passport V

Бренды по названию

Популярные бренды

Mindray Passport V, Руководство по эксплуатации

Результаты поиска

Содержание Passport V

Отзывы:

Похожие инструкции для Passport V

Бренды по названию

Популярные бренды