Kikusui KHA3000, Руководство по эксплуатации, Страница: 145 / 392

6
KHA3000
145
When the Test Time Expires (61000-3-12)
Executing Harm
onic Tests
4
Press the START key.
A confirmation dialog will be presented regarding the line impedance, optional current
sensor or any negative sum (

) of the real power.
5
After checking presence/absence of impedance and the setting of line
impedance, select the F1 key (OK).
If the F2 key (Cancel) is selected, presence/absence of impedance is neglected. To
start the test, press the START key again.
The test is started.
6
When the test ends, execute Step 1 in "When the Test Time Expires
(61000-3-12)" on page 143.
7
If the general judgment is FAIL, return to Step 1.
Repeat the procedure until the general judgment becomes PASS.
When the general judgment becomes PASS
8
Terminate the test.
Select an item that you want to operate in the test ending menu. For details on the
selection, see "Overview of the Test Ending Menu" on page 146.
9
Compare the set judgment Rsce and Rsce (estimated value) with each
other.
When the judgment Rsce is greater than 33 and equal to or
smaller than the Rsce (estimated value)
10
Calculate the Ssc from the judgment Rsce and rated apparent power of
the equipment.
For details on calculating the Ssc, see "Ssc calculation" on page 144.
When the judgment Rsce is greater than 33 and exceeds the
Rsce (estimated value)
11
Return to "Estimating the Rsce (61000-3-12)" on page 139.