Kikusui KHA3000, Руководство по эксплуатации, Страница: 179 / 392

7
KHA3000
179
Checking the AC Power Supply and Repeatability
Observation, Analysis and Judgem
ent of Harm
onics

Procedures for inputting a character (F1 key) and deleting a character (F2 key)
1
Press the F3 (Rename) key.
The Rename dialog will be presented.
2
Use the small knob, large knob or arrow keys to select a character by
moving the rectangular frame.
3
Press the F1 (Input 1-char) key.
The character selected will be added to the part where the cursor is blinking (Input 1-
char). To delete a character, press the F2 (Delete 1-char) key. To change the character
type, press the F3 (Change char type) key to select the type. To repeat adding or
deleting characters, return to the above step 2.
4
Press the ENTER key.
The characters entered will be fixed and saved.
3 Check View Phase Select a phase to be displayed. L1
4 Return Terminates the AC power supply check. –
5 Select Folder Select a folder that has been saved. Every time the F1 key is
pressed, the selected folder is indicated with a frame. The value
shown in contents of menu selected is the folder number (the
number of the top folder is 1). –
6 Select File Select a folder that has been saved. Every time the F2 key is
pressed, the selected folder is indicated with a frame. The value
shown in contents of menu selected is the folder number (the
number of the top folder is 1). –
7 Input 1-char Used to enter characters for the file. Up to 20 alphanumeric
characters and up to 10 hiragana and katakana characters can be
input. For details on the procedure, see page 179. –
8 Delete 1-char Used to delete characters in the file. For details on the procedure,
see page 179. –
9 Change char type Used to change the character types of the file. Every time the F3
key is pressed, the character types switch to alphanumeric,
hiragana and katakana characters in this order. –
10 Return Terminates the rename operation. –
11 Yes Deletes the file. –
12 No Does not delete the file. –
13 Cancel Cancels the delete operation. –
14 Return Terminates the delete operation. –
15 Return Terminates the operation of comparing the file with past data. –
16 Check View Phase Select a phase to be displayed. L1
17 Return Terminates the repeatability check. –
18
Prev/Next Page 2/2
Switches to the menu page common to the view types. –
F key: Function key. You can also use the ESC key to return.