Kikusui KHA3000, Руководство по эксплуатации, Страница: 295 / 392

13
KHA3000
295
Measurements in General
Rem
ote Contr
ol
Response
Returns the cutoff frequency of the anti-aliasing filter in the <NR3> format.
Current Range, Voltage Range and Auto Range
p. 291
These commands depend on linked/independent of the input circuit setting and wiring
method setting.
CURR:RANG
Sets the current range of each input phase (channel) to the same value.
Command
[SENSe:]CURRent:RANGe {<numeric>|MIN|MAX}
[SENSe:]CURRent:RANGe?
Parameter Value: 0.5, 1, 2, 5, 10, 20, 40 (The default is the value selected for the auto range.)
Unit: A
Response
Returns the current range value in the <NR3> format.
CURR:RANG:IND
Sets the current range of each input phase (channel) independently.
Command [SENSe:]CURRent:RANGe:INDependent
<numeric>,<numeric>,<numeric>
[SENSe:]CURRent:RANGe:INDependent?
Parameter Value: 0.5, 1, 2, 5, 10, 20, 40 (The default is the value selected for the auto range.)
Specify the <numeric> commands in the order of <L1 phase>, <L2 phase> and
<L3 phase>.
Unit: A
Response
Returns the current range values in the <NR3>, <NR3>, <NR3> format. The <NR3>
responses are in the order of <L1 phase>, <L2 phase> and <L3 phase>.
VOLT:RANG
Sets the voltage range of each input phase (channel) to the same value.
Command
[SENSe:]VOLTage:RANGe {<numeric>|MIN|MAX}
[SENSe:]VOLTage:RANGe?
Parameter Value: 150, 300, 600 (The default is the value selected for the auto range.)
Unit: V
Response
Returns the voltage range value in the <NR3> format.
See
** RST RST
** RST RST
** RST RST