Kikusui KHA3000, Руководство по эксплуатации, Страница: 164 / 392

164
KHA3000
View Setting Sub-menu
V/I Waveform
• The waveform of each phase is displayed in a specific color. As for current, L1 is
displayed in red, L2 in greenish yellow and L3 in purple, and for voltage, L1 in yellow, L2
in green and L3 in magenta.
• Used for observation and analysis.
• If you set Limit Values to 3rd/5th/Current Wave for the IEC 61000-3-2 Ed5.0 Class C
standard, the six phase angles that are required by the standard are displayed.
No. Menu item Description Default
1 Horizontal Scale Select a horizontal scale (scale factor). During analysis, it is fixed to × 1. × 1
2 Vertical Scale (Current) Select a vertical scale of voltage (scale factor). × 1
3 Vertical Scale (Voltage) Select a vertical scale of current (scale factor). × 1
4 Cursor Moves the cursor in the horizontal axis direction (time). Move the cursor
using the small knob or the large knob. The measured value at the
cursor is displayed. 1
5 Check View Phase Select a phase to be displayed. Select it with the small knob and press
the ENTER key. Every time the ENTER key is pressed, the check mark
turns on or off. Multiple checkboxes can be selected. L1, L2, L3
6 Return Terminates the view setting. –
F key: Function key. You can also use the ESC key to return.
F1
Horizontal Scale
10, 5, 2,
1, 1/2, 1/5
F2
Vertical Scale (Current)
10, 5, 2,
1, 1/2, 1/4
F3
Vertical Scale (Voltage)
10, 5, 2,
1, 1/2, 1/4
F4
Cursor
(Input numeric value)
F5
Check View Phase
L1
L2
L3
F6
Return
1
3
2
4
5
6