Kikusui KHA3000, Руководство по эксплуатации, Страница: 369 / 392

KHA3000
369
Appx
Messages
INPut subsystem
VFL
:IEC33
:JFAC
:DC
bool ON | OFF – OFF NR1
Limit value dc to be used for judgment
R/W 3
:DMAX
Limit value dmax to be used for
judgment
R/W 3
:DT33
Limit value Tmax (d(t)>3.3%) to be used
for judgment
R/W 3
:PLT
Limit value Plt to be used for judgment
R/W 3
:PST
Limit value Pst to be used for judgment
R/W 3
:MARG:D numeric 10 to 100
PC
T
100 NR3
Margin for the limit values dc, dmax and
Tmax (d(t)>3.3%)
R/W 3
:MARG:FLIC numeric 10 to 100
PC
T
100 NR3
Margin for the limit values Pst and Plt
R/W 3
:IEC311
:DMAX NRf 4 | 6 | 7 – 6 NR3 dmax limit value R/W 3
:PSTC NRf 1 to 12 – 12 NR3 Pst measurement count R/W 3
:PSTT numeric 30 to 900 S 600 NR3 Pst Measurement time R/W 3
:JFAC
:DC
bool ON | OFF – OFF NR1
Limit value dc to be used for judgment
R/W 3
:DMAX
Limit value dmax to be used for judgment
R/W 3
:DT33
Limit value d(t)>3.3% to be used for
judgment
R/W 3
:PLT
Limit value Plt to be used for judgment
R/W 3
:PST
Limit value Pst to be used for judgment
R/W 3
:MARG:D numeric 10 to 100
PC
T
100 NR3
Margin for the limit values dc, dmax and
d(t)>3.3%
R/W 3
:MARG:FLIC numeric 10 to 100
PC
T
100 NR3
Margin for the limit values Pst and Plt
R/W 3
:TIMP:DEF char
STAND1|
STAND3 |
SPEC1 |
SPEC3
– BAL char Definition of test impedance value R/W 3
:TIMP[:VAL]
numeric
0.001 to 9.999
OH
M
0.24
NR3
Specified value RA of the test
impedance
R/W 3
numeric 0.15
Specified value XA of the test
impedance
R/W 3
numeric 0.16
Specified value RN of the test impedance
R/W 3
numeric 0.10
Specified value XN of the test impedance
R/W 3
SCPI command Setting
Default
Response Influence
Description R/W
Note
Program header Parameter Unit
SCPI command Setting
Default
Response Influence
Description R/W
Note
Program header Parameter Unit
INP
:COUP char AC | DC – DC char Input coupling R/W 3
:FILT:FREQ numeric
0, 6000,
15000
HZ 15000 NR3 Anti-aliasing filter R/W 3
:LINK bool ON | OFF – ON NR1
Sets the input circuit of each input
phase (channel) to linked.
R/W 3
:CURR
:TERM char
SHU | CLAM |
BNC
– SHUN char
Sets the input circuit of each
current input phase (channel) to
the same value (linked).
R/W 3
:PLL:SOUR char
CL1 | CL2 |
CL3 | VL1 |
VL2 | VL3 |
EXT
– VL1 char
Sets the PLL source to
synchronize with the frequency of
the AC power supply.
R/W 3
:WIR:METH
string
“1P2W” |
“1P3W” |
“3P3W” |
“3P4W”
– “3P4W”
string
Wiring method R/W 3