Kikusui KHA3000, Руководство по эксплуатации, Страница: 225 / 392

9
KHA3000
225
Test Ending Menu
Ex
ecuting V
olta
g
e Fluctuation T
ests
3
Press the function key of a sub-menu to which you want to input a
comment.
The lower menu is displayed.

Procedures for inputting a character (F1 key) and deleting a character (F2 key)
4
Use the small knob, large knob or arrow keys to select a character by
moving the rectangular frame.
5
Press the F1 (Input 1-char) key.
The character selected will be added to the part where the cursor is blinking (Input 1-
char). To delete a character, press the F2 (Delete 1-char) key. To change the character
type, press the F3 (Change char type) key to select the type. To repeat adding or
deleting characters, return to the above step 4.
6
Press the ENTER key.
The characters entered will be fixed and saved.
7
Press the F6 key to return.
Character input, character deletion and character type change are terminated and
return to the upper hierarchy.
8
Press the F6 key to return.
Comment input is terminated.
9
Press the F6 key to return.
Finishing Report Print, it returns to the test ending menu.
Standard Name Setting
The settings are saved. Once you set it, you do not have to set it again.
1
Press the F2 key to select Report Print.
A sub-menu is displayed.
2
Press the F5 key to select Std. Name Setting.
A lower layer menu is displayed.
3
Press the F1 key to select Std. Name Select.
4
Press the F1 key to select Setting.
5
Press the F2 key to select Limit Value Name.
A dialog and sub-menu will be displayed.

Input 1-char (F1 key), Delete 1-char (F2 key)
The procedure is the same as given in page 225. Only alphanumeric characters can be used.
6
Press the F6 key to return.
After completing the Input 1-char and/or Delete 1-char operations, return to the upper layer.
7
Press the F2 key to select Meas. Tech. Name.
A dialog and sub-menu will be displayed.