Kikusui KHA3000, Руководство по эксплуатации, Страница: 230 / 392

230
KHA3000
Functions of Observation, Analysis and
Judgment
p. 232
There are ten view types. For some functions concerning observation, analysis and
judgment, available view types are limited. See "View Type List".
●
Observation
• Before and during the test, measurement circuit data is continuously collected and
displayed on the screen.
• Displays can be enlarged, reduced and changed in color. Measured values can be read
using the cursor.
●
Analysis
• After the test ends, test results can be analyzed.
• Saved test results can be called up and analyzed.
• Displays can be enlarged, reduced and changed in color. Measured values can be read
using the cursor.
●
Judgment
• After the test ends, test results can be judged in terms of the conformance to the
standards.
• Saved test results can be called and judged in terms of the conformance to the
standards.
• Before and during the test, measurement circuit data can be continuously collected and
judged in terms of the conformance to the standards.
• Limit values, PASS, WARN and FAIL can be displayed. Displays can be changed in
color.
Selecting the Targets of Observation, Analysis
and Judgment
The three types of target data of observation, analysis and judgment are as described below.
●
Current measurement data that are being observed before and during the test
• Used during the setting and test.
• This type of data can be observed by selecting a view type on the Vf-Observation and
Analysis display (Vf-VIEW).
●
Test result data after the test ends
• Used after terminating a test.
• This type of data can be observed by selecting a view type on the Vf-Observation and
Analysis display (Vf-VIEW).
●
Called-up test result data that have been saved
• Used by calling them up after terminating a test.
• This type of data can be observed by selecting a view type on the Vf-Observation and
Analysis display (Vf-VIEW).
p. 266
For details on how to call up result files, see “ Displaying the File Operation. ”
See
See