Kikusui KHA3000, Руководство по эксплуатации, Страница: 184 / 392

184
KHA3000
Test Condition Setting Displays
Two types of displays are available for setting test conditions. Choose either one.
• Vf-Test Conditions List display for setting test conditions while checking the test
conditions that were selected in the menu
• Vf-Observation and Test Conditions display for setting test conditions during
measurement
Using the Vf-Test Conditions List Display (Setting while
viewing test conditions)
1
Press the Vf key.
The Vf key LED illuminates and the Vf-Test Conditions List display appears. If the
screen does not switch to this display, perform the following procedure.
If the display does not appear by pressing the Vf key
A dialog box “ Can ’ t execute during test/analysis. Please operate it after ending ” is displayed
and the display switches to the test ending menu.
p. 220
While the test status display (in the upper left of the screen, “ Set ” in the case of the
figure shown above) is “ Test ” or “ Analysis, ” pressing the Vf key does not display the Vf-
Test Conditions List display. Because displaying the Vf-Test Conditions List display
starts a new test with the test conditions changed, the test that has been executed
needs to be terminated.
2
Press the F3 key (Exit) in the test ending menu.
The test ends. The test status display on the screen switches from “ Analysis ” to “ Set. ” If
the test results have not been saved with the F1 key (Save), a dialog box and a menu
for saving operation appear. To save the test results, select F1 (Yes); otherwise, select
F2 (No).
3
Press the Vf key.
The Vf key LED illuminates and the Vf-Test Conditions List display appears.
See