Kikusui KHA3000, Руководство по эксплуатации, Страница: 172 / 392

172
KHA3000
View Setting Sub-menu
●
61000-3-12 2004
When In/I1[%] is selected with the F4 key
Measured values are those in a selected data frame. They are expressed as the ratio to the
reference fundamental current.
●
61000-3-12 2004
When In[Arms] is selected with the F4 key
Measured values are those in a selected data frame.
Item Order Lim1[%] Meas[%] Angle[%]
Ave[%]
Per[%]
Max[%]
Description
Harmonic
orders 1st to
40th.
The 1st
order is the
reference
fundamental
current,
THD and
PWHD.
Limit value (%) Measured
value of
harmonic
current
Ratio (%) to
reference
fundamental
current
Measured
value of
phase angle
(Upper)
Average value (%)
from the beginning
of the test
When “ Average ” is
selected with the
F1 key
Ratio of the
Ave[%] to limit
value when
“ Average ” is
selected with the
F1 key
Ratio of the
Max[%] to limit
value when
“ Maximum ” is
selected with the
F1 key
(Lower)
Maximum value
(%) from the
beginning of the
test
When “ Maximum ”
is selected with
the F1 key
“ ----- ” means there
is no numeric value
to be displayed:
• When limit values
do not exist
• When a
calculated limit
value is less than
0.0001 A (0.001
A in the 10 A
range or higher)
Display color
changes.
“ ----- ” means there
is no value to be
displayed:
• In the test
condition setting
state (real-time
measurement)
Item Order Lim1[A] Meas[Arms] Angle[deg]
Ave[Arms]
Per[%]
Max[Arms]
Description
Harmonic
orders 1st to
40th.
The 1st
order is the
reference
fundamental
current,
THD and
PWHD.
“ ----- ” means there
is no value to be
displayed.
Measured
value of
harmonic
current (A)
Measured
value of
phase angle
(Upper)
Average value (A)
from the beginning
of the test
When “ Average ” is
selected with the
F1 key
Ratio of the
Ave[%] to limit
value when
“ Average ” is
selected with the
F1 key
Ratio of the
Max[%] to limit
value when
“ Maximum ” is
selected with the
F1 key
(Lower)
Maximum value
(A) from the
beginning of the
test
When “ Maximum ”
is selected with
the F1 key
“ ----- ” means there
is no numeric value
to be displayed:
• When limit values
do not exist
• When a
calculated limit
value is less than
0.0001 A (0.001
A in the 10 A
range or higher)
Display color
changes.
“ ----- ” means there
is no value to be
displayed:
• In the test
condition setting
state (real-time
measurement)