Keysight Technologies N69100 Series, Руководство по эксплуатации и обслуживанию

Страница: 33 / 260

Specifications and Characteristics
Specifications
Supplemental Characteristics
Common Characteristics
AC Input Efficiency, Power Factor, and THD
Output Impedance Graphs
Inductive Load Boundary for Constant Current (CC) Operation
Capacitive Load Boundary for Constant Voltage (CV) Operation
Excessive Dynamic Protection
Output Quadrants
Outline Diagrams
Specifications
Unless otherwise noted, specifications are warranted over the ambient temperature range of 0 to
40°C after a 30-minute warm-up. Specifications apply at the output terminals, with local sensing.
Specification N69143A N69145A N69146A N69172A N69173A
DC Ratings
Voltage source:
Current source and sink:
Power:
0 to 20 V
0 to 800 A; -80 A
10 kW
0 to 80 V
0 to 250 A; -25 A
10 kW
0 to 160 V
0 to 125 A; -12.5 A
10 kW
0 to 1000 V
0 to 60 A; -6 A
20 kW
0 to 2000 V
0 to 30 A; -3 A
20 kW
Output ripple & noise
CV peak-to-peak:1
CV rms:2
30 mV
3 mV
80 mV
8 mV
200 mV
20 mV
1.5 V
200 mV
3 V
400 mV
Load regulation
Voltage:3
Current:
1 mV
50 mA
3 mV
25 mA
6 mV
13 mA
50 mV
8 mA
100 mV
4 mA
Voltage programming &
measurement accuracy:4
0.02% + 4 mV 0.02% + 13 mV 0.02% + 26 mV 0.04% + 120 mV 0.04% + 240 mV
Current programming &
measurement accuracy:4
0.09% + 370 mA 0.06% + 115 mA 0.06% + 58 mA 0.09% + 23 mA 0.09% + 12 mA
Transient response5
Recovery Time:
Settling band:
900 µs
0.2 V
900 µs
0.8 V
900 µs
1.6 V
900 µs
10 V
900 µs
20 V
1 From 20 Hz to 20 MHz (-3dB bandwidth) with resistive load, terminals ungrounded, or either terminal grounded
2 From 20 Hz to 10 MHz (-3dB bandwidth) with resistive load, terminals ungrounded, or either terminal grounded
3 Also applies when remote sensing with a ≤1 V drop per load lead - see
Wire Size and Remote Sense Connections for additional information.
4 Percent of value + offset; at 25°C ±5°C after a 30 minute warm-up; measurement NPLC=1; valid for 1 year, see
Calibration Interval ;
with a ≤1 V drop per load lead - see Wire Size for information about additional load lead voltage drop
5 Time to recover to within the settling band following a step change from 40% to 90% and 90% to 40% of full load at Comp 0, with a 40 μs
current rise and fall time
Keysight N69100 Series Operating and Service Guide 33
1 Quick Reference