Section 5: Remote commands
2606B System SourceMeter® Instrument Reference Manual
5-4
2606B-901-01 Rev. B / May 2018
(on page 7-8)
(on page 7-9)
(on page 7-9)
(on page 7-10)
(on page 7-11)
(on page 7-11)
(on page 7-12)
(on page 7-13)
(on page 7-14)
(on page 7-14)
Data queue
Use the data queue commands to:
•
Share data between test scripts running in parallel
•
Access data from a remote group or a local node on a TSP-Link
®
network at any time
The data queue in the Test Script Processor (TSP
®
) scripting engine is first-in, first-out (FIFO).
You can access data from the data queue even if a remote group or a node has overlapped
operations in process.
(on page 7-46)
(on page 7-47)
(on page 7-47)
(on page 7-48)
Digital I/O
The digital I/O port of the instrument can control external circuitry (such as a component handler for
binning operations).
The I/O port has 14 lines. Each line can be at TTL logic state 1 (high) or 0 (low). See the pinout
diagram in
(on page 3-78) for additional information.
There are commands to read and write to each individual bit, and commands to read and write to the
entire port.
(on page 7-50)
(on page 7-51)
(on page 7-52)
(on page 7-56)
(on page 7-56)
(on page 7-57)
(on page 7-59)
(on page 7-59)
(on page 7-60)