Section 5: Remote commands
2606B System SourceMeter® Instrument Reference Manual
5-10
2606B-901-01 Rev. B / May 2018
Reset
Resets settings to their default settings.
(on page 7-56)
(on page 7-121)
(on page 7-144)
(on page 7-159)
(on page 7-210)
(on page 7-339)
(on page 7-342)
(on page 7-352)
(on page 7-364)
Saved setups
Use the saved setups commands to save or restore the configurations to or from the nonvolatile
memory of the instrument or an installed USB flash drive. You can use the
setup.poweron
attribute
to specify which setup is recalled when the instrument is turned on.
(on page 7-172)
(on page 7-173)
Scripting
Scripting helps you combine commands into a block of code that the instrument can run. Scripts help
you communicate with the instrument efficiently. These commands describe how to create, load,
modify, run, and exit scripts.
For detail on using scripts, see
Fundamentals of scripting for TSP
(on page 6-1).
(on page 7-89)
(on page 7-146)
(on page 7-147)
(on page 7-160)
(on page 7-161)
(on page 7-161)
(on page 7-162)
(on page 7-163)
(on page 7-164)
(on page 7-164)
(on page 7-165)
(on page 7-165)
(on page 7-166)
(on page 7-167)
(on page 7-167)
(on page 7-168)
(on page 7-169)
(on page 7-170)