Section 7: TSP command reference
2606B System SourceMeter® Instrument Reference Manual
7-120
2606B-901-01 Rev. B / May 2018
lan.linktimeout
This attribute contains the LAN link timeout period.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory
20 (20 s)
Usage
timeout
= lan.linktimeout
lan.linktimeout =
timeout
timeout
The LAN link monitor time-out period (in seconds)
Details
You must enable the command
lan.autoconnect
before you can use this attribute.
The
timeout
value represents the amount of time that passes before the instrument disconnects
from the LAN due to the loss of the LAN link integrity.
The LAN interface does not disconnect if the connection to the LAN is reestablished before the
timeout
value expires.
If the LAN link integrity is not restored before the
timeout
value expires, the instrument begins to
monitor for a new connection.
Example
print(lan.linktimeout)
Outputs the present LAN link timeout setting.
Also see
(on page 7-122)
lan.lxidomain
This attribute contains the LXI domain.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory
0
Usage
domain
= lan.lxidomain
lan.lxidomain =
domain
domain
The LXI domain number (0 to 255)
Details
This attribute sets the LXI domain number.
All outgoing LXI packets are generated with this domain number. All inbound LXI packets are ignored
unless they have this domain number.
Example
print(lan.lxidomain)
Displays the LXI domain.