2606B System SourceMeter® Instrument Reference Manual
Section 7: TSP command reference
2606B-901-01 Rev. B / May 2018
7-37
Figure 115: ConfigPulseIMeasureVSweepLin()
Example
ConfigPulseIMeasureVSweepLin(smua, 0, 0.01, 0.05, 1, 1e-3, 0.1, 20,
smua.nvbuffer2, 3)
Set up a pulsed sweep that uses channel A. The pulsed sweep starts at 10 mA, ends at 50 mA, and returns to
a 0 mA bias level between pulses. Each pulsed step is on for 1 ms, and then at the bias level for 100 ms. The
voltage limit is 1 V during the entire pulsed sweep. The pulse train is comprised of 20 pulsed steps and the
pulse train is assigned a
tag
index of 3.
Also see
(on page 7-105)
(on page 5-18)