2606B System SourceMeter® Instrument Reference Manual
Section 1: Introduction
2606B-901-01 Rev. B / May 2018
1-3
For more information, see
(on page 6-31).
To identify IP addresses of instruments connected to the local area network (LAN) that support
VXI-11 discovery protocol, you can also use LXI Discovery Tool, available from the Resources tab of
the
Capabilities and features
The 2606B has the following features:
•
4.5, 5.5, or 6.5 digit display resolution
•
Resistance and power measurement functions
•
Two-quadrant source operation
•
Contact check function
•
High-capacitance mode for load impedance up to 50
µ
F
•
Linear, logarithmic, and custom sweeping and pulsing
•
Filtering to reduce reading noise
•
Trigger model supports extensive triggering and synchronization schemes at hardware speeds
•
Internal memory stores five user setup options
•
Dedicated reading buffers that can each store and recall over 140,000 measurements; additional
dynamic reading buffers can be created
•
USB flash drive access for saving data buffers, test scripts, and user setups
•
Digital I/O port: Allows the 2606B to control other devices
•
Web-based characterization tool that provides easy access to data gathering, sweeping, and
pulsing features
•
LXI
®
version 1.4 Core 2011 compliance
•
Embedded TSP scripting engine accessible from any host interface; responds to high-speed test
scripts comprised of instrument control commands
•
TSP-Link
®
expansion bus that allows TSP-enabled instruments to trigger and communicate with
each other; advanced Test Script Processor (TSP
®
) scripting engine features enable parallel
script execution across the TSP-Link network
•
Supports Universal Serial Bus (USB) and ethernet local area network (LAN) connections
