2606B System SourceMeter® Instrument Reference Manual
Section 7: TSP command reference
2606B-901-01 Rev. B / May 2018
7-121
Also see
None
lan.nagle
This attribute controls the state of the LAN Nagle algorithm.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Power cycle
Not saved
0 (lan.DISABLE)
Usage
state
= lan.nagle
lan.nagle =
state
state
The state of the Nagle algorithm:
1
or
lan.ENABLE
: Enable the LAN Nagle algorithm for TCP
connections
0
or
lan.DISABLE
: Disable the Nagle algorithm for TCP connections
Details
This attribute enables or disables the use of the LAN Nagle algorithm on transmission control protocol
(TCP) connections.
Also see
(on page 7-122)
lan.reset()
This function resets the LAN interface.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
lan.reset()
Details
This function resets the LAN interface. It performs the commands
lan.restoredefaults()
and
lan.applysettings()
.
Also see
(on page 7-112)
(on page 7-122)