2606B System SourceMeter® Instrument Reference Manual
Section 2: General operation
2606B-901-01 Rev. B / May 2018
2-17
Change the IP configuration through the web interface
You can change the LAN settings, such as IP address, subnet mask, gateway, and DNS address,
through the web page of the instrument.
If you change the IP address through the web page, the web page tries to redirect to the IP address
that is configured in the instrument. In some cases, this may fail. This generally happens if you switch
from IP address assignment that uses a static address to IP address assignment that uses a DHCP
server. If this happens, you need to revert to either using the virtual front panel to set the IP address
or use an automatic discovery tool to determine the new IP address.
You can also change the IP configuration using TSP and SCPI commands. See
(on page C-1) for information.
To change the IP configuration using the instrument web page:
1. Access the internal web page as described in
Connecting to the instrument through the web
(on page 2-15).
2. From the navigation bar on the left, select
IP Configuration
.
3. Click
Modify
. The Modify IP Configuration page is displayed.
Figure 16: 2606B Modify IP Configuration screen