Section 7: TSP command reference
2606B System SourceMeter® Instrument Reference Manual
7-312
2606B-901-01 Rev. B / May 2018
status.questionable.over_temperature.*
This attribute contains the questionable status over temperature summary register set.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute
- -
- -
- -
- -
.condition (R)
Yes
Not applicable
Not saved
Not applicable
.enable (RW)
Yes
Status reset
Not saved
0
.event (R)
Yes
Status reset
Not saved
0
.ntr (RW)
Yes
Status reset
Not saved
0
.ptr (RW)
Yes
Status reset
Not saved
6 (All bits set)
Usage
questionableRegister
= status.questionable.over_temperature.condition
questionableRegister
= status.questionable.over_temperature.enable
questionableRegister
= status.questionable.over_temperature.event
questionableRegister
= status.questionable.over_temperature.ntr
questionableRegister
= status.questionable.over_temperature.ptr
status.questionable.over_temperature.enable =
questionableRegister
status.questionable.over_temperature.ntr =
questionableRegister
status.questionable.over_temperature.ptr =
questionableRegister
operationRegister
The status of the questionable status over temperature summary register; a
zero (0) indicates no bits set (also send 0 to clear all bits); other values indicate
various bit settings
Details
These attributes are used to read or write to the questionable status over temperature summary
registers. Reading a status register returns a value. The binary equivalent of the returned value
indicates which register bits are set. The least significant bit of the binary number is bit B0, and the
most significant bit is bit B15.
For information about .condition, .enable, .event, .ntr, and .ptr registers, refer to
Enable and transition registers
(on page E-16). The individual bits of this
register are defined in the following table.
Bit
Value
Description
B0
Not used
Not applicable.
B1
status.questionable.over_temperature.SMUA
Set bit indicates that an over temperature
condition was detected on SMU A.
Bit B1 decimal value: 2
Binary value: 0000 0010
B2
status.questionable.over_temperature.SMUB
Set bit indicates that an over temperature
condition was detected on SMU B.
Bit B2 decimal value: 4
Binary value: 0000 0100
B3-B15
Not used
Not applicable.
As an example, to set bit B1 of the questionable status over temperature summary enable register,
set
status.questionable.instrument.enable =
status.questionable.instrument.SMUA
.