Section 2: General operation
2606B System SourceMeter® Instrument Reference Manual
2-22
2606B-901-01 Rev. B / May 2018
Display indicators (not shown)
The items listed below represent the possible display indicators and their meanings.
Indicator
Meaning
EDIT
Instrument is in editing mode
ERR
Questionable reading or invalid calibration step
REM
Instrument is in remote mode
TALK
Instrument is addressed to talk
LSTN
Instrument is addressed to listen
SRQ
Service request is asserted
REL
Relative mode is enabled
FILT
Digital filter is enabled
AUTO
Source or measure autorange is selected
*
(asterisk)
Readings are being stored in the buffer
Flash Upgrade
Allows you to upgrade the firmware for the module from the web interface. See
(on page A-2) for details.
TSP Express
The TSP
®
Express tab provides access to the TSP Express Launch page. From this page, click the
Launch
button to start TSP Express.
Only one web application can be running and connected to the instrument at a time. TSP Express
will not run if another web application, such as TSB Embedded, Reading Buffers, or Flash Upgrade,
is running and connected to the instrument. If you need to run another web application, be sure to
close TSP Express before starting the other web application.
To run TSP Express:
1. From the navigation area on the left side of the web interface, select
TSP Express
. The TSP
Express page is displayed.
2. Click the
Launch
button. The TSP Express window opens.
3. There is a help pane on the right side of the TSP Express main window. You can adjust the width
of the help pane by sliding the vertical bar. Click and follow the step-by-step example in the help
pane to become familiar with TSP Express (there is a link to the example in the TSP Express
Introduction's first paragraph).