Section 7: TSP command reference
2606B System SourceMeter® Instrument Reference Manual
7-118
2606B-901-01 Rev. B / May 2018
Example
ipaddress = lan.config.ipaddress
Retrieves the presently set LAN IP address.
Also see
(on page 7-122)
(on page 7-125)
lan.config.method
This attribute contains the LAN settings configuration method.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory
0 (lan.AUTO)
Usage
method
= lan.config.method
lan.config.method =
method
method
The method for configuring LAN settings; it can be one of the following
values:
0
or
lan.AUTO
: Selects automatic sequencing of configuration
methods
1
or
lan.MANUAL
: Use only manually specified configuration settings
Details
This attribute controls how the LAN IP address, subnet mask, default gateway address, and DNS
server addresses are determined.
When method is
lan.AUTO
, the instrument first attempts to configure the LAN settings using dynamic
host configuration protocol (DHCP). If DHCP fails, it tries dynamic link local addressing (DLLA). If
DLLA fails, it uses the manually specified settings.
When method is
lan.MANUAL
, only the manually specified settings are used. Neither DHCP nor
DLLA are attempted.
Example
print(lan.config.method)
Outputs the current method.
For example:
1.00
Also see
(on page 7-122)
lan.config.speed
This attribute contains the LAN speed used when restarting in manual configuration mode.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory
100 (100 Mbps)