Section 2: General operation
2606B System SourceMeter® Instrument Reference Manual
2-34
2606B-901-01 Rev. B / May 2018
To turn the beeper on or off from the virtual front panel:
1. Press the
MENU
key, and then select
BEEPER
.
2. Select one of the following:
ENABLE
DISABLE
To turn the beeper on or off from the TSP command interface:
Set the
beeper.enable
attribute. For example, to enable the beeper, send:
beeper.enable = 1
Display mode
Use the
DISPLAY
key to scroll through the various display modes shown in the figure below. Refer to
(on page 3-66) for more information about the display.
Figure 21: Display modes