2606B System SourceMeter® Instrument Reference Manual
Section 2: General operation
2606B-901-01 Rev. B / May 2018
2-3
TSP-Link ports
Connections for the TSP-Link
®
system expansion
interface, which test system builders can use to connect
multiple instruments in a master and subordinate
configuration. TSP-Link is a high-speed trigger
synchronization and communication bus. For details, see
TSP-Link System Expansion Interface
(on page 6-46).
Rear panel
The rear panel of the 2606B is shown below. Descriptions of rear-panel components follow the figure.
Figure 2: 2606B rear panel
Channel connector
Channel A
Channel B
This connector provides input/output connections for
HI and LO, sense (S HI/S LO), and guard (G).
Connections are as follows:
LO = LO
S LO = Sense LO
G = Guard
S HI = Sense HI
HI = HI
Ground
Chassis ground
Ground terminal for connecting output HI or LO to
chassis ground. This provides a connection terminal to
the equipment frame.
Line fuse and power receptacle
Line fuse and
power receptacle
Connect the line cord to the power receptacle and a grounded AC
power outlet. The line fuse, located just above the power
receptacle, protects the power line input of the instrument. For
safety precautions and other details, see
(on page A-1).