Section 7: TSP command reference
2606B System SourceMeter® Instrument Reference Manual
7-116
2606B-901-01 Rev. B / May 2018
lan.config.dns.verify
This attribute defines the DNS host name verification state.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory
1 (lan.ENABLE)
Usage
state
= lan.config.dns.verify
lan.config.dns.verify =
state
state
DNS hostname verification state:
1
or
lan.ENABLE
: DNS host name verification enabled
0
or
lan.DISABLE
: DNS host name verification disabled
Details
When this is enabled, the instrument performs DNS lookups to verify that the DNS host name
matches the value specified by
lan.config.dns.hostname
.
Example
print(lan.config.dns.verify)
Outputs the present DNS host name verification
state.
If it is enabled, the output is:
1.00
Also see
(on page 7-122)
lan.config.duplex
This attribute defines the LAN duplex mode.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory
1 (lan.FULL)
Usage
duplex
= lan.config.duplex
lan.config.duplex =
duplex
duplex
LAN duplex setting can be one of the following values:
1
or
lan.FULL
: Selects full-duplex operation
0
or
lan.HALF
: Selects half-duplex operation
Details
This attribute does not indicate the actual setting currently in effect. Use the
lan.status.duplex
attribute to determine the present operating state of the LAN.
Also see
(on page 7-122)