IBM Netfinity 3500 M10, Руководство пользователя

Страница: 67 / 268

7. Select Change Administrator Password and follow the
instructions on the screen.
8. Press Esc until you return to the Configuration/Setup Utility
program menu.
9. Before you exit from the program, select Save Settings from the
Configuration/Setup Utility program menu.
10. To exit from the Configuration/Setup Utility program, press Esc
and follow the instructions on the screen.
Deleting an administrator password
Use the Configuration/Setup Utility program to delete an
administrator password.
To delete an administrator password:
1. Start the Configuration/Setup Utility program (see “Starting and
using the program” on page 19).
2. Select System Security from the Configuration/Setup Utility
program menu.
3. Select Administrator Password.
4. Select Delete Administrator Password and follow the
instructions on the screen.
5. Press Esc until you return to the Configuration/Setup Utility
program menu.
6. Before you exit from the program, select Save Settings from the
Configuration/Setup Utility program menu.
7. To exit from the Configuration/Setup Utility program, press Esc
and follow the instructions on the screen.
Erasing a lost or forgotten administrator password
This section applies to lost or forgotten administrator passwords
that are not protected by enhanced security. For information on lost
or forgotten passwords that are protected by enhanced security, refer
to “Erasing a lost or forgotten administrator password protected by
enhanced security” on page 53.
Chapter 3. Configuration/Setup Utility program
49