IBM Netfinity 3500 M10, Руководство пользователя

Страница: 49 / 268

Start Options Descriptions
Keyboardless Operation
Mode When this option is enabled, the server can start up and run
without a keyboard. If you enable this option, you must
disable your power-on password, which can be done using the
System Security
option on the Configuration/Setup Utility
main menu.
Power-On Self-Test Use this option to set the level of power-on self testing (Quick
or Enhanced) that will be done during the power-on sequence.
Note: The Quick setting reduces the amount of testing;
however, Quick setting is not recommended when using
an unattended start mode.
Power on Logos Use this option to control whether or not logos are displayed
during the power-on sequence.
Power On F1/Esc Option Use this option to control whether or not the F1 and Esc key
options are displayed during the power-on sequence. This
setting does not affect the behavior of these keys, only the
display of the options.
Power On Status Use this option to control whether or not power-on status
indicators (such as memory count and system check points) are
displayed during the power-on sequence. This option also
controls the power-on beeps.
Virus Detection Use this option to specify whether you want the virus checker
that comes with the server BIOS to check for viruses each time
you turn on your server.
When virus detection is enabled, your server checks the master
boot record to see if the information has changed since the last
time you turned on the server. If the information has changed,
the BIOS will display a message that warns that your system
might contain a virus.
Note: This option does not have an effect on the supplied
anti-virus program or on additional virus checking
programs you may have purchased. It also does not
remove viruses from your server.
Chapter 3. Configuration/Setup Utility program
31