IBM Netfinity 3500 M10, Руководство пользователя

Страница: 64 / 268

6. At Password Prompt, select Off, On, or Dual. Press Left Arrow
(
←
) or Right Arrow (
→
) to toggle between selections.
Note: If Remote Administration is enabled, you cannot select
On
. In this case you should select Dual. If it is set to On
when Remote Administration is enabled, it will
automatically be reset to Dual.
7. Select Change Power-On Password, and follow the instructions
on the screen.
8. Press Esc twice to return to the Configuration/Setup Utility
program menu.
9. Before you exit from the program, select Save Settings from the
Configuration/Setup Utility program menu.
10. To exit from the Configuration/Setup Utility program, press Esc
and follow the instructions on the screen.
Deleting a power-on password
Use the Configuration/Setup Utility program to delete a power-on
password.
To delete a power-on password:
1. Start the Configuration/Setup Utility program (see “Starting and
using the program” on page 19).
2. Select System Security from the Configuration/Setup Utility
program menu.
3. Select Power-On Password.
4. Select Delete Power-On Password and follow the instructions
on the screen.
5. Press Esc twice to return to the Configuration/Setup Utility
program menu.
6. Before you exit from the program, select Save Settings from the
Configuration/Setup Utility program menu.
7. To exit from the Configuration/Setup Utility program, press Esc
and follow the instructions on the screen.
46
Netfinity 3500 M10 User's Handbook