IBM Netfinity 3500 M10, Руководство пользователя

Страница: 160 / 268

If you remove an ISA legacy adapter, you must set to Available the
system resources that are no longer being used. To do this, follow
the above procedures and select Available at step 4.
Note: For more information on adapters and resolving conflicts,
see “Adapter configuration” on page 102 and “Interrupt and
DMA resources” on page 144.
Configuring startup devices
Startup devices are devices where the server looks for an operating
system when it is powered on. After adding new devices to the
server, you might want to change the sequence of the startup
devices. You can use the Configuration/Setup Utility program to
configure startup devices.
To configure startup devices:
1. Start the Configuration/Setup Utility (see “Starting the
Configuration/Setup Utility program” on page 137).
2. Select Start Options from the Configuration/Setup Utility menu
and press Enter.
3. Select Startup Sequence from the Start options menu and press
Enter .
4. Select First Startup Device and press Enter.
5. Use the arrow keys to make your selection and press Enter.
6. If necessary, repeat the above steps for Second Startup Device,
Third Startup Device , and Fourth Startup Device.
7. If Automatic Power On Startup Sequence is enabled, repeat the
above steps to select the startup devices.
8. Remember to save the changes when you exit from the
Configuration/Setup Utility program.
142
Netfinity 3500 M10 User's Handbook