IBM Netfinity 3500 M10, Руководство пользователя

Страница: 149 / 268

Important
Clearing CMOS memory erases the configuration of your server.
Therefore, you must reconfigure the server after clearing CMOS
memory. If possible, record the configuration information of
your server before moving the CMOS jumper.
Before you begin
Ÿ
Using the Configuration/Setup Utility program, record all
configuration information.
Ÿ
Read “Safety information” on page 70 and “Handling
static-sensitive devices” on page 72.
Ÿ
Turn off the server.
Ÿ
Disconnect the power cord and cables and remove the server
cover (see “Disconnecting cables and removing the cover” on
page 76).
1. Locate the Clear CMOS Request jumper on the system board.
For more information, see “Identifying parts on the system
board” on page 82 or see the label inside the server.
2. Move the jumper from its normal position (pins 1 and 2) to pins
2 and 3. It might be helpful to use needlenose pliers to move
the jumper, but be careful not to damage any system board
components or crush the jumper.
1
2
3
1
2
3
1
2
3
Chapter 5. Installing options
131