IBM Netfinity 3500 M10, Руководство пользователя

Страница: 171 / 268

on exiting the Configuration/Setup Utility program without
making any changes to current settings.) To select an item,
press Up Arrow (
↑
) or Down Arrow (
↓
) to highlight the item,
and then press Enter.
5. If you selected Continue in step 4, the Configuration/Setup
Utility program menu appears on the screen. You will see a
pointer next to any menu items that are malfunctioning or that
have been changed since the last time you turned on your
server. If you did not knowingly make a change to a flagged
menu item, there is probably a malfunction in that item. If you
made a change, continue here. If you did not make a change,
go to the Important text box which follows step 5d.
To use the Configuration/Setup Utility program, do the
following:
a. Select the menu item that is flagged (or that you wish to
view) by pressing Up Arrow (
↑
) or Down Arrow (
↓
), and
then press Enter.
b. A new menu specific to the item that you selected appears.
Press Left Arrow (
←
) or Right Arrow (
→
) to toggle between
choices for a menu item. (Note that each menu item has a
Help screen. To view the Help screen, select the menu item,
and then press F1.)
c. When you have finished viewing and changing settings,
press Esc to return to the Configuration/Setup Utility
program menu.
d. Before you exit from the program, select Save Settings.
When you exit from the Configuration/Setup Utility
program menu (see step 5e), your operating system will
start automatically (unless there is an unresolved problem
with the startup device).
Chapter 6. Solving problems
153