IBM Netfinity 3500 M10, Руководство пользователя

Страница: 211 / 268

Using the diagnostic diskette
To start the IBM Enhanced Diagnostics using the diagnostic diskette,
do the following:
1. Turn off your server and any attached devices.
2. Insert the IBM Enhanced Diagnostics diskette into diskette drive
A.
3. Turn on all attached devices; then turn your server on.
4. Follow the instructions on the screen.
Other programs on the IBM Enhanced Diagnostics CD and diskette
The IBM Enhanced Diagnostics CD and diskette also contain utility
programs designed to provide information about your server
hardware and the way it is configured. This information might be
useful in helping to isolate problems related to the operating system
and device drivers.
Installing files from Option Diskettes
An optional device or adapter might come with a diskette.
Diskettes that are included in option packages usually contain files
that the system needs for recognizing and activating the options.
Until you install the necessary files, the new device or adapter
might cause error messages.
If your optional device or adapter comes with a diskette, you might
need to install some configuration (.CFG) files or diagnostic files
(.EXE or .COM) from the diskette to your hard disk. Refer to the
documentation that comes with the option to see if you need to
install files.
BIOS recovery
If power to your server is interrupted while POST/BIOS is being
updated, your server might not restart (reboot) correctly. If this
happens, perform the following procedure to recover.
1. Turn off the server.
2. See “Safety information” on page 70 and “Handling
static-sensitive devices” on page 72.
Chapter 6. Solving problems
193